Use the VPN Server

From OpenFSG

This article or section needs to be wikified to meet quality standards. Please help improve this article.

How to set up VPN PPTP host (Firmware Version 3.2.3 beta).

1. Login in at the admin page of your FSG.
2. Go to “Connections” and choose “VPN”
3. when you see the VPN settings screen choose “Add connection”
4. Status: You can choose to enable or disable the connection.
5. Protocol: This is the type of the VPN connection. If you want to connect from a Windows PC, choose PPTP.
6. Name: This is the login name for the PPTP connection.
7. Pre-Shared Key: Fill in your password here.
8. Remote Network: This is the IP address range that will be used for the connected clients. Note that the number of available IP addresses limits the number of connected clients. Example: 192.168.1.10-20 will allow a maximum of 11 connections.
9. Press “Apply” to confirm your settings
10. You will see a screen as here on the left.

Your VPN Host is set up now it's time to set up a VPN client.